seitesblinkern - side repeaters

[De Lorre]

Hi everyone!

On the event in Landgraaf (NL), I finally found some new side repeaters for my new ka... I would like to install them but I don't really get the old ones of...

I have tried with a screwdriver between them (with some cloth on it to protect the paint) and it made some strange noise which I didn't like... and it moved a little bit but I don't think I can pull them off without breaking them? It was like they are glewed or something?

I've heard about a trick to remove the, like pulling them forward and then pull it but I can't remember...

Some tips?

grtz and thx!

[KA_911]

There is only one side an the repeater which can easy be levered out. I can´t remember if it´s the left or the right one. If one side won´t work, simply take the other.
Your Idea with the srewdriwer is good. Try it again on the other side of the repeater.

There is also an other solution, but it´s a little "tedious": Remove the inner wheel case an pull out the repeater from the back-side. This way will definitly save your painting! :icq3:

[Zebra]

It is very simple from the inside. Remove your... "Rad" (was zum Teufel heißt Rad auf Englisch?) and than you can pull it outside :icq3:
Totally without noise or damage :)

[alf007]

"Rad" (was zum Teufel heißt Rad auf Englisch?)

wheel
;)

[De Lorre]

thx for the tips!

I managed to put them into place without removing the dustprotection on the wheelcase. I used some duct tape around the side markers and then I removed it with a screwdriver.
I really like the new ones!

http://img157.imageshack.us/img157/1104/hpim0765kr8.jpg

thx for the help!

greets